TYPICAL PROPERTIES⁽¹⁾
MECHANICAL	Value	Unit	Standard
Tensile Stress, yld, Type I, 50 mm/min	62	MPa	ASTM D 638
Tensile Stress, brk, Type I, 50 mm/min	55	MPa	ASTM D 638
Tensile Strain, yld, Type I, 50 mm/min	7	%	ASTM D 638
Tensile Strain, brk, Type I, 50 mm/min	90	%	ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	91	MPa	ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span	2240	MPa	ASTM D 790
Hardness, Rockwell M	70	-	ASTM D 785
Hardness, Rockwell R	118	-	ASTM D 785
Taber Abrasion, CS-17, 1 kg	10	mg/1000cy	ASTM D 1044
IMPACT	Value	Unit	Standard
Izod Impact, unnotched, 23掳C	3204	J/m	ASTM D 4812
Izod Impact, notched, 23掳C	640	J/m	ASTM D 256
Tensile Impact, Type "S"	525	kJ/m虏	ASTM D 1822
Falling Dart Impact (D 3029), 23掳C	169	J	ASTM D 3029
THERMAL	Value	Unit	Standard
Vicat Softening Temp, Rate B/50	151	掳C	ASTM D 1525
HDT, 0.45 MPa, 6.4 mm, unannealed	137	掳C	ASTM D 648
HDT, 1.82 MPa, 6.4 mm, unannealed	132	掳C	ASTM D 648
CTE, -40掳C to 95掳C, flow	6.84E-05	1/掳C	ASTM E 831
Thermal Conductivity	0.19	W/m-掳C	ASTM C 177
Relative Temp Index, Elec	130	掳C	UL 746B
Relative Temp Index, Mech w/impact	120	掳C	UL 746B
Relative Temp Index, Mech w/o impact	130	掳C	UL 746B
PHYSICAL	Value	Unit	Standard
Specific Gravity	1.21	-	ASTM D 792
Specific Volume	0.83	cm鲁/g	ASTM D 792
Density	1.217	g/cm鲁	ASTM D 792
Water Absorption, 24 hours	0.15	%	ASTM D 570
Water Absorption, equilibrium, 23C	0.35	%	ASTM D 570
Water Absorption, equilibrium, 100掳C	0.58	%	ASTM D 570
Mold Shrinkage, flow, 3.2 mm	0.5 - 0.7	%	SABIC Method
Melt Flow Rate, 300掳C/1.2 kgf	10	g/10 min	ASTM D 1238
OPTICAL	Value	Unit	Standard
Light Transmission	85	%	ASTM D 1003
Haze	1	%	ASTM D 1003
Refractive Index	1.586	-	ASTM D 542
ELECTRICAL	Value	Unit	Standard
Volume Resistivity	>1.E+17	Ohm-cm	ASTM D 257
Dielectric Strength, in air, 3.2 mm	16.7	kV/mm	ASTM D 149
Relative Permittivity, 50/60 Hz	3.01	-	ASTM D 150
Relative Permittivity, 1 MHz	2.96	-	ASTM D 150
Dissipation Factor, 50/60 Hz	0.0009	-	ASTM D 150
Dissipation Factor, 1 MHz	0.01	-	ASTM D 150
Arc Resistance, Tungsten {PLC}	7	PLC Code	ASTM D 495
Hot Wire Ignition {PLC)	2	PLC Code	UL 746A
High Voltage Arc Track Rate {PLC}	3	PLC Code	UL 746A
High Ampere Arc Ign, surface {PLC}	2	PLC Code	UL 746A
Comparative Tracking Index (UL) {PLC}	3	PLC Code	UL 746A
FLAME CHARACTERISTICS	Value	Unit	Standard
UL Recognized, 94V-2 Flame Class Rating (3)	1.47	mm	UL 94
UL Recognized, 94V-0 Flame Class Rating (3)	2.99	mm	UL 94
Oxygen Index (LOI)	35	%	ASTM D 2863
UV-light, water exposure/immersion	F1	-	UL 746C

Source GMD, last updated:01/04/2000

Processing

Parameter
Injection Molding	Value	Unit
Drying Temperature	120	掳C
Drying Time	3 - 4	hrs
Drying Time (Cumulative)	48	hrs
Maximum Moisture Content	0.02	%
Melt Temperature	295 - 315	掳C
Nozzle Temperature	290 - 310	掳C
Front - Zone 3 Temperature	295 - 315	掳C
Middle - Zone 2 Temperature	280 - 305	掳C
Rear - Zone 1 Temperature	270 - 295	掳C
Mold Temperature	70 - 95	掳C
Back Pressure	0.3 - 0.7	MPa
Screw Speed	40 - 70	rpm
Shot to Cylinder Size	40 - 60	%
Vent Depth	0.025 - 0.076	mm

产品推荐

免责声明：: 本页面所展现的公司信息、产品信息及其他相关信息，均来源于其对应的商铺，信息的真实性、准确性和合法性由该信息来源商铺的所属发布者完全负责，供应商网对此不承担任何保证责任。

友情提醒：: 建议您在购买相关产品前务必确认供应商资质及产品质量，过低的价格有可能是虚假信息，请谨慎对待，谨防欺诈行为。
: 建议您在搜索产品时，优先选择带有或标识的会员，该为供应商网VIP会员标识，信誉度更高。

广州华灿塑料科技有限公司

主营产品：塑胶原料、工程塑料、工程塑料辅料助剂

供应沙伯PC 943A-116

联系方式

供应沙伯PC 943A-116详细介绍